Harmonic-resolution-systems SXR Audio Stand Manual de usuario

HARMONIC RESOLUTION SYSTEMSSXR AUDIO STAND

Note: it is important to get proper torque on struts to achieve proper framestiffness and performance. Step 7. Slide a polymer ring over the threads

Note:If your SXR came partially assembled please make sure that in Step 8 the 1/4” - 20x 3/4” flat head cap screws must be loosened 1/4 turn before pr

At this point the screws connecting the Cross Brace sub assembly should be fullytightened. Before tightening screw fully be sure that the Cross Brace

Photo 11As done in Step 4 - add 3-4 drop of oil to each of the threads of the struts.If your SXR requires another layer to be added repeat Steps

Note: it is important to get proper torque on each Strut and the Locking Nuts toachieve proper frame stiffness and performance. Step 12. Screw the

Step 14. At this point the SXR Frame is completely assembled. Flip the SXRFrame upright as shown in Photo 16. Move the frame to the exact final lo

Isolation Base Installation into SXR Frame - Uncrate each of the isolation basesif not already complete. Make sure you read and follow all of the ins

Photo 17 Photo 18Completed SXR Singlewide3V version on left, and Doublewide 3V version on theright. Both system shown with M3 Isolation Bases.Loadi

Please follow the care instructions in the isolation base manual to clean and carefor the shelves (isolation bases) of the SXR Audio Stand. Read and

WarrantyLimited Five Year WarrantyHarmonic Resolution Systems warrants to the purchaser that each HRS SXR AudioStand is free of manufacturing defects

Discover Your System’s Capability

HARMONIC RESOLUTION SYSTEMS INC.2495 Main Street, Suite 355Buffalo, NY 14214Telephone: 716-873-1437Web: www.avisolation.comE-mail: info@avisolation.

IntroductionThank you for purchasing the Harmonic Resolution Systems SXR Audio Stand.When used properly, it will give you many years of superior music

Safety InstructionsIMPORTANT WARNINGS!Do not place any tall objects on the top shelf of the SXR Audio Stand. A tall objectis any object with a height

Set-Up InstructionsThe SXR Audio Stand consists of a frame structure and the isolation bases thatsupport each component. The components required to a

Step 1. Obtain one of the Support Braces with threaded studs. Place it upsidedown on the work surface with threads facing up (see photo 1). Obtain

Note: Be very careful not to cross-thread the threaded struts or fasteners. Theyshould thread in very easily. If it does not, back it out and start

Step 3. Slide a polymer ring over each of the threaded studs on the SupportBrace as shown in Photo 4. Push down until the polymer ring is seated in

Step 5. By hand screw the struts onto the threaded studs as shown in Photo 6. Ifyou have a stand with different size struts keep in mind that you ar